Nose Gear Pivot assembly with bearings for Cozy MKIV aircraft.

Nose Gear Pivot assembly with bearings for Cozy III, Long-EZ and VariEZ aircraft.

Special modified NG6A with threaded internal bearing spacers with two AN5-14A bolts. For use when the AN5-41A bolt cannot be removed without cutting or drilling holes in the fuselage.

Retrofit or new build kit to replace manual retract system. Recommended for VariEZ, Long-EZ, Cozy and Cozy MKIV.
See detailed description under nose lift specifications.

Consists of:

NL2 Basic Actuator assembly
NG2A Stainless Steel Support foot to replace NG2
NG3A HD stainless steel NG3A to replace NG3
NG4A HD stainless steel NG4A to replace NG4
MEA Manual extension assembly (Includes MS U-joint, 4130 shaft, and ¼” extension machined to fit the actuator manual input shaft.
AWH-12 Wiring harness with plugs and 10A DPDT center ON/Off switch and LED indicators prewired. Includes plug and panel “auto defeat”switch for AEX option.
Complete installation instructions and drawings.

Retrofit or new build kit to replace manual retract system. Recommended for VariEZ, Long-EZ, Cozy and Cozy MKIV.
See detailed description under retraction systems specifications.

Consists of:

NL2 Basic Actuator assembly
NG2A Stainless Steel Support foot to replace NG2
NG3A HD stainless steel NG3A to replace NG3
NG4A HD stainless steel NG4A to replace NG4
AWH-12E Wiring harness with plugs and 10A DPDT center ON/Off switch and LED indicators prewired.
Includes plug and panel “AUTO DEFEAT” switch for AEX option and “EMERG. EXT”. Switch on control panel. Includes electrical emergency extension system. Includes sealed backup battery.
Complete installation instructions and drawings.

High Performance actuator assembly with Electric back drive brake.
Recommended for VariEZ, Long-EZ , Cozy, Cozy MKIV and other aircraft.
See detailed description under retraction system specifications.

Consists of:

NG2A Stainless Steel Support foot to replace NG2
NG3A HD stainless steel NG3A to replace NG3
NG4A HD stainless steel NG4A to replace NG4
AWH-12E Wiring harness with plugs and 10A DPDT center ON/Off switch and LED indicators prewired.
Includes plug and panel “AUTO DEFEAT” switch for AEX option and “EMERG. EXT”. Switch on control panel. Includes electrical emergency
extension system. Includes sealed backup battery.

24 volt Electric Nose Wheel Actuator system for canard type aircraft complete set. Retrofit kit to replace manual retraction system.

Consists of:

NL2 Basic Actuator assembly
NG2A Stainless Steel Support foot to replace NG2
NG3A HD stainless steel NG3A to replace NG3
NG4A HD stainless steel NG4A to replace NG4
MEA Manual extension assembly (Includes MS U-joint, 4130 tube, and ¼” extension machined to fit the actuator manual input shaft.
AWH-24 Wiring harness with plugs and 10A dpdt center ON/Off switch and LED indicators prewired. Includes plug and panel “auto defeat” switch for AEX option.
Complete installation instructions and drawings.

12 volt Electric Nose Wheel Actuator basic Actuator assembly (includes mounting plates only)

24 volt Electric Nose Wheel Actuator basic Actuator assembly (includes mounting plates only)

12 volt high performance Nose Wheel Actuator with active electric back drive brake. Basic Actuator assembly (includes mounting plates only).

$1485.00

Manual extension assembly (Includes MS U-joint, 4130 tube, and ¼” extension machined to fit the actuator manual input shaft.

Optional manual extension shaft to allow manual extension to exit below instrument panel. (Includes one MS U-joint and bracket mounted on gear case).
Note this option must be ordered with NL1 or NL2.

Optional electrical emergency extension system to supplant or replace the MEA manual extension shaft. Includes sealed backup battery. This option is for retrofit of installed nose lift systems with AWH-12 harnesses.

12 volt wiring harness with plugs and 10A dpdt center ON/Off switch and LED indicators prewired. Includes plug and panel “auto defeat” switch for AEX option.

Wiring harness with plugs and 10A DPDT center ON/Off switch and LED indicators prewired. Includes plug and panel “AUTO DEFEAT” switch for AEX option and “EMERG. EXT”. Switch on control panel. Includes electrical emergency extension system. Includes sealed backup battery.

24 volt wiring harness with plugs and 10A dpdt center ON/Off switch and LED indicators prewired. Includes plug and panel “auto defeat” switch for AEX option.

12 volt wiring harness with plugs and 10A dpdt center ON/Off switch and LED indicators prewired. Manual harness cannot be used with AEX option.

12 volt Automatic Extension Electronic unit. Size & wt.: 1.5” x 2.25”x 4.5”, 4.0 oz. ( Includes Electronic module and installation instructions)

24 volt Automatic Extension Electronic unit. Size & wt.: 1.5” x 2.25”x 4.5”, 4.0 oz. ( Includes Electronic module and installation instructions)

Landing brake electrical actuator kit for new build or retrofit. Includes actuator, brackets, mounting pad, hardware, prewired wiring harness with engraved pane, LED position indicators, throttle switch for automatic retract on takeoff and pictorial installation instructions.

Castering nose wheel assembly for Cozy MKIV aircraft. Includes:
MK15A Machined casting.
MK16A Machined Fork casting.
All parts of spring washer type shimmy damper installed.
2 – NG1 bearing bushings.

(no 10” wheel or tire supplied)

Castering nose wheel assembly for VariEZ, LongEZ, and Cozy aircraft. Includes:
NG15A Machined casting.
NG16A Machined Fork casting.
All parts of spring washer type shimmy damper installed.
2 – NG1(EZ) bearing bushings to fit WH4 wheel.

(no wheel or 8” tire supplied)

4” cast aluminum nose wheel for to fit MKAA and NG401A Castering nose wheel assemblies. Includes bearings and rubber bearing seals.

10” x 3.5 x 4 6ply MKIV nose wheel tire. Straight groove tread. 555 lb load Rating.

10” MKIV nose wheel tube.

8” 2.80/2.50 x 4 6ply LongEZ/Cozy nose wheel tire. Straight groove tread. 475 lb Load Rating.

8” LongEZ/Cozy nose wheel tube.

Canopy latch parts kit. Complete kit of MKIV canopy latch standard hardware, 3-C8, C1-L, 2-C2L, 3-C5, C3, C6, C6A, C4, C4A. Assembled and black anodized.

EZ-RL

EZ-Rotary canopy latch. The EZ-Rotary canopy latch is designed for retrofit or new build product for VariEZ, Long EZ, Cozy, and Cozy MKIV aircraft. The plans type canopy latch and variations of it require an access door to unlatch and raise the canopy. The EZ-Rotary latch uses the original latch handle and eliminates the access door and allows access from inside or outside of the aircraft by use of a key. A fore and aft adjustable mounting bracket is provided that mounts with two screws to the under side of the longeron. Anodized aluminum construction. Installation time is one hour.

See the down load page for the complete installation instructions.

Front and back view	LongEZ installation

ETC-12

Electronic Trim Controller. This unit is designed especially for aircraft that have a large difference between cruising speed and landing speed where trim adjustment is very sensitive at cruise and much less sensitive at landing. However, it could be used on any experimental aircraft that uses a 12 volt dc motor driven actuator such as Thompson, Firgelli, Strong, etc. Uses SPDT stick mounted miniature switches with pilot switch priority, Trim motor pulse width modulation(PWD) adjustable speed control, full speed motor start pulse, full speed trim after adjustable time delay on low speed, and inputs for trim control from a auto pilot (Trio Avionics or others) with pilot trim priority. In use the pilot can adjust the trim with great precision by holding the trim switch down for anything less than two seconds (adjustable from .5 to 4 sec). If the switch is held greater than 2 seconds the PWM cuts out and the trim motor goes into full speed allowing the pilot to get full trim quickly as is often needed during landing. During auto pilot operation the auto pilot automatically adjust the trim for the least need for correction by the servo. However, if the pilot wishes to override the auto pilot he can do so without disengaging the auto pilot.